14
Getting to know your phone
4. Align the back cover over the battery compartment and press it down
until it clicks into place.
Charging your phone
A rechargeable Li-ion battery is used to power your phone. A USB adapter,
which is included with your phone, is used to charge the battery. Ask your
local MPCS sales representative for further details regarding approved
batteries and chargers. Before using your phone for the first time, make
sure the battery is fully charged. An uncharged battery will be fully
recharged after at least 3 hours.
USB Cable
USB Adapter
NOTE
Make sure the battery is installed before connecting the USB adapter. If the battery is
not installed and the USB adapter is connected, the phone will not operate properly
due to prolonged power cycling. Also, removing the battery with the USB adapter
connected may damage the device. Please unplug USB adapter before removing
battery.
WARNING!
If the touch screen does not function while the phone’s in the process of charging,
this may be due to an unstable power supply. As a result, disconnect the USB cable
from the device or unplug the USB adapter from the power outlet.
1. Connect the USB adapter and USB cable.
2. Plug the USB cable (as shown on the next page) into the phone’s
Charger/Accessory Port.
To Next Page
Loading...
Need help?
General
