34
PROGRAMMING MODE
12. Top off time
Entering set up
mode.
You will see LqC1
Button Display
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display previous top o time.
Press Med Temp.(+) or Low Temp.(-) button to select time
between 1 and 30.
Press the Start button.
The machine sets up the top o time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/o toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/o toggle switch.
• OPL/Coin Type - Press “High Temp.” twice.
MFL62512875_150414.indd 34 2015.4.14 9:43:59 AM
To Next Page
Loading...
Need help?
General
