Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the input source to USB by pressing F
button repeatedly
To Do this
Playback
Press
dM
.
Pause
During playback, press
dM
.
Skip to the next/
previous le
During playback, press V on
the remote control to go to the
next le.
Playing less than 2 seconds,
press C on the remote con-
trol to go to the previous le.
Playing after 3 seconds, press
C on the remote control to
go to the beginning of the le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning off the unit.
y
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
y
When you pause the USB playback, USB LED
on the main unit blinks.
,
Note
Other operations
Turn off the sound temporarily
Press (Mute) to mute your unit.
To cancel it, press
(Mute) again on the remote
control or change the volume level.
Auto LED Off
This unit automatically turns o the LED.
Press and hold AUTO POWER ON on the remote
control for about 2 seconds. Then Auto LED Off
function is turned on. (Default : ON)
OPTICAL, HDMI, LG TV, ARC : If there is no key input
for about 20 seconds, function LED will turn off.
To turn off this function, press and hold AUTO
POWER OFF on the remote control for about 2
seconds. Function LED always turned on.
Even if turn on the Auto LED O function, BT
(Bluetooth), USB and PORTABLE LED will not
turn o.
,
Note
To Next Page
Need help?
General
Weight and Dimensions
