34 Operation
Operation
4
Radio Operations
Be sure that FM aerial is connected (Refer to
the page 22)
Listening to the radio
1. Press
t
RADIO&INPUT until FM appears
in the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/- )on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
t
RADIO&INPUT until FM appears
in the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press
ENTER a preset number will ash
in the display window.
4. Press PRESET (-/+) to select the preset
number you want.
5. Press
ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
"ERASE ALL" will ash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1. Press PRESET - / + to select a preset
number you want to delete.
2. Press CLEAR, the preset number will blink
in the display window.
3. Press CLEAR again, to delete the selected
preset number.
Improving poor FM reception
Press
B
(PLAY), MONO/STEREO on the
remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
HLT35W-F2_DZAFLLK_ENG_4969.indd 34 2011-04-14 �� 12:09:15
To Next Page
Loading...
Need help?
General
