LG SJ3 User Manual

Operating20
Operating
3
Using BLUETOOTH®
technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
y
Available Devices : Smart phone, MP3 player,
Notebook, etc..
y
Version : 4.0
y
Codec : SBC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Select the input source to Bluetooth by pressing
F button on the remote control or unit repeatedly.
- Bluetooth LED will blink.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device.
Your unit appears as “LG SJ3 (XX)”.
y
XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG SJ3 (08)” on your Bluetooth device.
y
Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
,
Note
3. When this unit is successfully connected with
your Bluetooth device, Bluetooth LED will turn
on.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.

LG SJ3 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Impedance	4 Ω
Tweeter diameter	20 mm
Number of tweeter drivers	2
Soundbar speaker RMS power	100 W
Woofer diameter (imperial)	2.2 \
Signal-to-Noise Ratio (SNR)	82 dB
Total Harmonic Distortion (THD)	10 %
Subwoofer included	Yes
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Receiver included	-
FM radio	No
Product color	Black
Audio formats supported	LPCM, MP3, WMA
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	6 \
Bluetooth version	4.0
HDMI ports quantity	0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	27 W
Package depth	223 mm
Package width	1005 mm
Package height	373 mm
Package weight	9500 g
Maximum screen size	43 \

Weight and Dimensions

Depth	47 mm
Width	950 mm
Height	71 mm
Soundbar weight	2470 g
Subwoofer depth	252 mm
Subwoofer width	171 mm
Subwoofer height	320 mm
Subwoofer weight	4200 g