Operating26
Operating
3
Sound adjustment
Setting sound effect
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
each sound effect buttons.
Sound effect Description
ASC
(Adaptive Sound
Control)
Analyzes the property of input
sound and provides the sound
optimized for the content in
real time.
BASS BLAST
Reinforces the bass and
powerful sound.
CINEMA
You can enjoy more immersive
and cinematic surround sound.
y
In some of sound effect mode, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
y
You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound le changed.
,
Note
Adjust the woofer level settings
You can adjust the sound level of subwoofer as your
preference.
Press WOOFER LEVEL
o
/
p
on the remote control
to adjust woofer level.
When the subwoofer level reaches maximum or
minimum , standby LED (Red) on the main unit
turns on for 2 seconds.
,
Note
Night mode
This function is useful when you want to watch
movies at low volume late at night. Set Night mode
to On to reduce the sound intensity and improve
neness and softness.
Press NIGHT ON/OFF on the remote control to turn
on or off night mode.
To Next Page
Loading...
Need help?
General
