LG SPK8-W Service Manual

1-10
Copyright © 2018 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
1. FACTORY RESET
• Key : Press WiFi Button on the soundbar for 5 seconds.
• Result : Initialize EEPROM (MICOM) and MPEG (MAIN).
(But Wireless Woofer and Wireless Rear speakers are not)
2. SW Version Display
• Enter : Press Volume ‘-’ on Soundbar with ‘Play/Pause’ on Remocon for 5 seconds.
• Change Display : Whenever press ‘F.SKIP’ on remocon, displaying SW program is changed.
M : MICOM
PQ : PEQ
B : MAIN
D : DSP
H: HDMI
TX : WOOFER TX
RX : WOOFER RX
RT : REAR TX
RR : REAR RX
MQ : MEQ
T : TOUCH
• Result : Scroll SW Version on Soundbar VFD.
• EXIT : Press ‘Play/Pause’ on Remocon for 5 seconds.
< MICOM > < PEQ > < MAIN > < DSP >
3. OPTION Edit
• Enter : Volume ‘-’ on soundbar with ‘AV SYNC’ key on remocon for 5 seconds.
• Result : VFD display OPTION number and OPTION data like ‘’00 00” “02 4A” …
• How to Change Option data :
Change Option data by press ‘PLAY/PAUSE’ on remocon key,
change option number by press ‘B.SKIP’ on remocon, ‘F.SKIP’ on remocon after change option fi nish,
press ‘AUTO VOL’ key. System will save option and restart.
4. WIRELESS WOOFER & REAR SPEAKER TX RESET
• ENTER : Press Mute key for 3 seconds when Woofer and Wireless Rear speaker is off.
• RESULT : VFD displays ‘WL RESET’’ and initialize TX module.
Paring will be disconnected.
HIDDEN KEY MODE
< MAIN Key > < Remocon >

LG SPK8-W Specifications

General

Brand	LG
Model	SPK8-W
Category	Speaker System
Language	English