12
MAINTENANCE INSTRUCTIONS
Front Ventilation Grille
Vacuum the front ventilation grill 3~4 time a year to
make sure there must be no build-up of lints or dirts
which cause improper intake air flow.
Moisture Sensor?
This device functions to sense the moisture
remaining contents of the laundry during operation
which means it must be cleaned all the time. The
main reason of cleaning this part is to remove the
build-up of lime scale on the surface of sensor. Wipe
the sensors inside drum (Shown in the picture).
1. Unscrew
cover.
2. Take
connecting kit
out.
3. Separate water
container hose
from the kit.
4. Connect drain
hose to the kit.
Condensed water Drain-out
Normally, condensed water is pumped up to water
container where water is collected until emptied.
Not only using water container, but water can be
drained out directly to drain hose especially when
dryer is stacked on top of washing machine.
With connecting kit for drain hose, you can simply
change water path and water reroute to the
drainage facility.
Please follow the below steps.
To Next Page
Loading...
Need help?
General
