Your phone comes with the SIM card pre-
installed.
Step 1. Remove the Back Cover
Place your fingernail in the USB/charger port
cutout at the bottom of the phone and pop the
cover o the phone.
Optional: Insert the microSD Card
If you have a microSD card, slide the microSD
card into the microSD card slot.
NOTE: The microSD card is sold separately.
Setting up your phoneAbout your phone
NOTE: Devices and software are constantly evolving—the screen
images and icons you see here are for reference only.
Step 2. Insert the Battery
Insert the battery, making sure to align the gold
contacts. Press down gently to secure the
battery.
Step 3. Replace the Back Cover
Place the back cover over the back of the
phone and then press down along the edges to
secure the cover.
Step 4. Charge Your Phone
Before turning on your phone, charge it fully.
WARNING! Please use only an approved charging accessory to
charge your phone. Improper handling of the charging port, as
well as the use of an incompatible charger, may cause damage
to your device and void the warranty.
Para la versión en español, visite
verizonwireless.com/support
Meet your
phone.
Proximity/
Ambient
Light Sensor
Earpiece
Microphone
Speaker
3.5mm
Headset
Jack
Front
Camera
Back
Button
Home Button
Recent
Apps
Button
Laser
Detection
Auto-Focus
Flash Rear Camera
Volume
Buttons
NFC Touch
Point
Power/Lock
Button,
Fingerprint
ID Sensor
USB/Charger Port
To Next Page
Need help?
General
