Setting up your phone
Your phone already has a SIM card installed.
Charge your phone
Before turning on your phone, charge it fully.
WARNING: Only use approved chargers with your
device. Using incompatible chargers or tampering with
the charger port could damage your device and void the
warranty.
Para la versión en español, visite
verizonwireless.com/support
Meet your
phone.
About your phone
NOTE: Devices and software are constantly evolving—the
screen images and icons you see here are for reference
only.
Front Camera
Earpiece
Proximity/
Ambient Light
Sensor
Home Button
Recent Apps Button
Back Button
Back Camera
Power/Lock
Fingerprint ID
SIM/microSD
Card Tray
LED Flash
Laser Detection
Auto-Focus
NFC Touch Point
Microphone
USB/Charger Port
Speaker
Battery Module
Volume
Headset Jack
Optional: Insert the microSD card.
1. Insert the ejection pin that came with your phone
into the hole on the card tray to partially eject the
tray from its slot. Carefully pull the card tray out (as
shown below).
2. Insert the microSD card with the gold contacts
facing down and toward the phone (as shown).
3. Carefully insert the card tray back into the slot and
close it.
NOTE: The microSD card is sold separately.
Your phone comes with the battery installed in the
battery module.
Follow the instructions below if you need to replace
the battery. You can also use these instructions to
move the battery when you attach one of LG’s G5
accessories (sold separately).
1. Turn o your phone and hold it with the screen
facing you.
2. Press the module release button to release the
battery module and then pull it out to remove it from
your phone.
Module
Release
Button
Battery module
To Next Page
Need help?
General
