EasyManuals Logo
Home>LG>Monitor>W2242S

LG W2242S User Manual

LG W2242S
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be located at
a location where it is easy to operate.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG W2242S and is the answer not in the manual?

LG W2242S Specifications

General IconGeneral
Pixel pitch0.282 x 0.282 mm
Aspect ratio16:10
Display diagonal22 \
Display resolution1680 x 1050 pixels
Vertical scan range56 - 75 Hz
Horizontal scan range30 - 83 kHz
Viewing angle, vertical170 °
Contrast ratio (dynamic)8000:1
Contrast ratio (typical)700:1
Display brightness (typical)300 cd/m²
Box depth (imperial)5 \
Box width (imperial)22.59836 \
Box height (imperial)16.02 \
SafetyUL(cUL), TUV-GS, SEMKO
Product colorSilver
Market positioning-
Power consumption (standby)1 W
Power consumption (typical)40 W
ManualYes
DVI-I ports quantity0
Built-in camera2020-02-10T09:07:15.000Z
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)209.4 mm
Width (with stand)515.7 mm
Height (with stand)418 mm
Weight (with stand)4650 g
Depth (without stand)63.06 mm
Height (without stand)344.6 mm
Weight (without stand)4450 g

Related product manuals