LG W2242S User Manual

A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Make sure you push it until you hear it “click”.
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
4. Tie down the base lock to perpendicularity direction.
5. Once assembled take the monitor up carefully and face
the front side
Stand Body
Stand Base
Stand Body
Hinge Body

LG W2242S Specifications

General

Pixel pitch	0.282 x 0.282 mm
Aspect ratio	16:10
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Viewing angle, vertical	170 °
Contrast ratio (dynamic)	8000:1
Contrast ratio (typical)	700:1
Display brightness (typical)	300 cd/m²
Box depth (imperial)	5 \
Box width (imperial)	22.59836 \
Box height (imperial)	16.02 \
Safety	UL(cUL), TUV-GS, SEMKO
Product color	Silver
Market positioning	-
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Manual	Yes
DVI-I ports quantity	0
Built-in camera	2020-02-10T09:07:15.000Z

Weight and Dimensions

Depth (with stand)	209.4 mm
Width (with stand)	515.7 mm
Height (with stand)	418 mm
Weight (with stand)	4650 g
Depth (without stand)	63.06 mm
Height (without stand)	344.6 mm
Weight (without stand)	4450 g