LG W2242T User Manual

Troubleshooting
Have you installed the display driver?
● Have you installed the
display driver?
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
● The screen color is
mono or abnormal.
● The screen blinks.
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
• Make sure the power voltage is high enough, It
has to be in the range of AC100-240V 50/60Hz.
A18

LG W2242T Specifications

General

Pixel pitch	0.282 x 0.282 mm
Aspect ratio	16:10
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (typical)	-
Display brightness (typical)	250 cd/m²
Special features	sRGB, HDCP, Flatron f Engine, Intelligent Auto, Auto resolution, 4:3 in Wide (ARC)
Power requirements	90 – 264 Vac, 47 – 63 Hz
Display viewable area (HxV)	473.86 x 296.16 mm
HDCP	Yes
Certification	TÜV-Typ, CE, EPA Energy Star, UL, CSA, SEMKO, FCC-B, TCO03
Product color	Black
Compliance industry standards	DDC 2B
LED indicators	Stand-by
Tilt angle range	-5 - 20 °
Panel mounting interface	75 x 75 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	22 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	210 mm
Height (with stand)	418 mm
Weight (with stand)	4700 g
Depth (without stand)	63 mm
Width (without stand)	516 mm
Height (without stand)	346 mm