7
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts Turn the leveling feet to adjust
(4 EA:
) with the supplied wrench. the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
The appliance goes up by
rotating the feet clockwise.
The appliance come down by
rotating the feet counterclockwise.
4. INSTALLATION
To Next Page
Loading...
Need help?
General
