26
USING YOUR WASHING MACHINE
Adjusts the melody and button tones,
SIGNAL
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be changed and
off as desired.
1
Press
A
.
2
Turn
B
to the desired cycle.
3
Press
. Adjust the melody and button tones as
desired.
4
Press the desired option to use the other options.
5
Press
C
.
Prewashing, PRE-WASH
Pre-wash for 16 minutes when clothes are covered in dirt or
dust. This feature is suitable for heavily soiled items.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
-
light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
Rinse, drain and spin only, RINSE+SPIN
Use this cycle to rinse detergent from load.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Pulse
C
.
Adding extra rinse cycle, EXTRA RINSE
You can add an extra rinse cycle to the default rinse cycle.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
-
light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
Presetting the start time, DELAY WASH
You can set the desired start time.
1
Press
A
and turn
B
to the desired cycle.
2
Press the desired option to use the other options.
3
Press repeatedly to select the desired start time.
-
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 19 hours.
4
Press
C
.
Efficiency cleaning, STEAM
Adding the Steam option to these cycles provides superior
cleaning performance while reducing energy and water
consumption.
By using a hot steam spray from above and cooler water
below, fabrics get the cleaning benefits of a super hot wash,
without the energy usage or potential damage to fabrics.
1
Press
A
and turn
B
to the desired cycle.
2
Press . The washer will automatically adjust the
cycle settings.
3
Set any other desired options.
4
Press
C
.
WARNING
Do not touch the door during steam cycles.
y
The door
surface can become very hot. Allow the door lock to
release before opening the door.
Do not attempt to override the door lock mechanism
y
or reach into the washer during a steam cycle.
Steam
can cause severe burns.