LG WT-H550 User Manual

Care
and
Maintenance
32
leanin g an d Maintenance
Cold water washing
• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular
intervals e.g. every 5th wash should be at least a WARM one.
When you have finished
• Turn oft'taps to prevent the chance of flooding should a hose burst.
• Always unplug the power cord after use.
When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the
filter in the inlet valve occasionally.
(The figure of power cord and water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
□
Close the tap before turning off the power.
HOT/COLD(WARM) and then press the j \ r
[START/PAUSEJ button to remove water fc?
from the machine completely. n
B
Turn off the power before
"” 8 " .. <
□
After removing the water supply
hose pull out the filter. A- ^ )
□
Replace the filter after cleaning it.
NOTE
• Before cleaning the filter, the impurities in the water supply hose should be removed.
• Without the multi clean filter fitted, the laundry may get damaged.
Clean multi clean filter as often as possible.
(Foreign objects accumulation may cause smell and filtering performance will be impared.
■ In order to reduce lint generation,
-laundry which creates lint easily should get turned inside out.
-Wash load sorted by color.
To Clean the Pump casing (for pump model)
I Make sure the
machine has drained
completely, then
place a towel on
thefloor under the
drainpump cap.
Excesswater will
flow out.
Turn the cap
counter¬
clockwise and
pull it out.
Remove any foreign
objects and fluff inside
pump casing and from the
filter.
□ Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
NOTE _
• Check if water leaks after reassembling. (The Rubber ring is in the cap)

LG WT-H550 Specifications

General

Brand	LG
Model	WT-H550
Category	Washer
Language	English