LG WT7600HKA User Manual

1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it by
screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check for
any water leakage.
Connecting Water Supply Hose to the Machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
• A new washing machine should be installed with
new hoses. The old hoses should not be reused.
• Replace hoses every 5 years.
Screw Type
Water tap
Rubber Seal
Water Supply Hose
Cold water inlet
Hot water inlet
2-2. CONNECTING WATER SUPPLY HOSE
6
Before connecting the water supply hose to the water tap, check the hose type and then choose the
correct instruction here below.

LG WT7600HKA Specifications

General

Style	top load
Color	black stainless steel
Washer Capacity	5.2 cubic feet
Max Spin Speed	950 revolutions per minute
Spin Speeds	5
Number of Cycles	14
Cycle Selections	pre wash+ normal, cotton/normal, tub clean, bulky/bedding, heavy duty, perm. press, speed wash, delicates, bright whites™, towels, sanitary, allergiene™, waterproof, downloaded
Options	soak, extra rinse, fabric softener, delay wash, child lock, custom program pgm save, signal, rinse+spin, spin only, coldwash™, staincare™, water plus, add garment
Temperature Settings	5
Temperature Selections	extra hot, hot, warm, cold, tap cold
Soil Levels	light, normal, heavy
Internal Heater	yes
Control Panel	electronic
Delay Start / End	yes
Child Lock	yes
Cycle Signal	yes
Steam	yes
Smart Home	yes
Annual Energy Consumption	130 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	28 3/8 inches
Height	44 1/2 inches
Width	27 inches
Net Weight	146.83 pounds