LYTEMODE NETWORK POWERED HUB OVERVIEW LYTEMODE NETWORK POWERED HUB USER’S GUIDE
4
Lytemode Network Powered Hub Overview
The Lytemode Network Powered Hub (ILSLMHUB) provides DC Power across the Lytemode ILS
Network for the purpose of powering Master Stations, Remotes, and Interfaces. The Network Powered
Hub provides 1.5 amps each for four separate, electrically isolated Lytemode Network circuits. The
unit is equipped with separate compartments for Line Voltage wiring connections and Low Voltage
wiring connections. Terminal blocks for all connections are included. The Network Powered Hub can
be either wall-mounted or rack-mounted using the included reversible mounting brackets.
The Lytemode Network Powered Hub can be used to power large networks, to supply additional power
for very long cable lengths, or used as a redundant supply to ensure Lytemode Network reliability.
Multiple Powered Hubs may be connected to a Lytemode ILS Network.
Figure 1: Hub Interior View
NEUTRAL
LINE IN
GROUND
N/A
1 GND
2 AC LINE
3 AC NEUTRAL
Output + 4
Output +5
Output - 6
Output - 7
Input Power Connections - Terminal strip for
connection of Line, Neutral and Ground wiring.
High Voltage Compartment
Network Output Connections - Four terminal strips
for connection of CAT5e cables, which supply power to
the Lytemode devices in a daisy-chain configuration.
Low Voltage
Mounting Bracket (2) - Configurable
brackets for wall or rack mounting.
Compartment
INTERIOR VIEW
Power Supply
To Next Page
Loading...
Need help?
General