To Next Page

To Previous Page

EtherFast

Managed 24-Port with Dual Gigabit SwitchEtherFast

Series

The Management Setup Menu screen allows you to adjust the communication

parameters, ensuring a reliable connection. The new administrator password is

set through this menu. The IP parameters for Web, telnet, or SNMP/RMON

management are set here as well.

• Network Configuration - Includes IP setup, ping facility, and HTTP

setup for the on-board Web agent.

• Serial Port Configuration - Sets communication parameters for the serial

port, including baud rate, console time-out, and screen data refresh inter-

val.

• SNMP Configuration - Activates authentication failure traps and config-

ures communities and trap managers.

• User Configuration - Sets the user names and passwords for system

access.

• TFTP Download - Downloads new version of firmware to update your

system.

• Configuration File - Allows downloading of a configuration file.

Select OK to return to the previous panel.

Management Setup Menu

Switch Information

The Switch Information screen displays hardware and firmware version num-

bers for the main board, as well as the power status.

• Hardware Version - Hardware version of the main board.

• Firmware Version - System firmware version in ROM.

• Serial Number - Serial number of the main board.

• Number of Ports - Number of ports available on this Switch.

• Power Status - Shows if power is active or inactive.

• Fan Power Status - Shows if power to fan is active or inactive.

• G1 Information - Speed of the first Gigabit port.

• G2 Information - Speed of the second Gigabit port.

Select OK to return to the previous panel.

Linksys Etherfast User Manual

Questions and Answers: