1. How can I reset the Linksys WRT3200ACM to factory defaults?
There are two (2) ways to reset the Linksys WRT3200ACM to factory defaults:
Hardware Reset – Press and hold the Reset button at the back panel of the Linksys
WRT3200ACM for about 10 seconds then release.
Software Reset – Log in to your Linksys Smart Wi-Fi Account. Under Router Settings,
click Troubleshooting > Diagnostics. Click Reset under Factory reset.
2. I have reset the Linksys WRT3200ACM and now I can’t launch the setup page. What do I
do?
You can try the following troubleshooting steps:
Step 1:
Enter “myrouter.local” or “192.168.1.1” in a web browser.
Step 2:
If your computer has a static IP Address, make sure it has valid DNS numbers. If not, set the
computer to obtain an IP Address automatically.
Step 3:
Try again then, if needed, reassign a static IP Address back to the computer.
3. What should I do if I can't connect to the Internet wirelessly, and my network name is not
listed in the Available Networks?
Try to perform the following steps to resolve the issue:
Verify that your router is ON, and the Power LED is solidly lit.
If you are far from the router, you might try moving closer to make sure that your device is
within the wireless network range.
Using a computer attached to the router via a network cable, open the router's web-based
setup page by entering “myrouter.local” or “http://192.168.1.1”. Go to Wireless > Broadcast
SSID and make sure that it is set to Yes for both the 2.4 GHz and 5 GHz bands.
4. What should I do when my wireless network performance is slow, inconsistent, suffering
from weak signal, or having difficulty maintaining a VPN connection?
Wireless technology uses radio frequency as a medium to connect devices. This means that
connectivity and the throughput performance between devices decreases when the distance
between devices increases.
Other factors that will cause signal degradation are the following:
Obstructions such as walls, fixtures, furniture and metal appliances
Wireless signal interference caused by other wireless networks using the same frequency,
baby monitors, microwave ovens, etc.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
