Linksys X2000 Product Overview

6
Product Overview
Linksys X2000/X3000
X3000
Top
Ethernet If the LED is continuously lit, the
modem router is successfully connected to a
device through that port.
Wi-Fi Protected Setup™ Button Press this
button to have Wi-Fi Protected Setup™ search for
your Wi-Fi Protected Setup™-supported wireless
device. The LED is continuously lit when a Wi-
Fi Protected Setup™ connection is successfully
established. The LED blinks slowly while Wi-Fi
Protected Setup™ is setting up a connection, and
blinks rapidly in amber if an error occurs. The LED
is off when Wi-Fi Protected Setup™ is idle.
Wireless The Wireless LED lights up when the
wireless feature is enabled. It flashes when the
modem router is actively sending or receiving
data over the network.
WAN Lights up white when the modem router
is connected directly to an ADSL line. Lights up
blue when the modem router is set up as a router
only and is connected to the internet through a
separate modem.
Power The Power LED lights up when the
modem router is powered on. When the modem
router goes through its self-diagnostic mode
during every boot-up, the LED flashes. When the
diagnostic is complete, the LED is continuously
lit.

Linksys X2000 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Dimensions (WxDxH)	245 x 67 x 273 mm
Minimum system requirements	IE 7.0 Safari 4 Firefox 3
Compatible operating systems	Windows XP SP3 Windows Vista SP1 Windows 7 Mac OS X Leopard 10.5 Mac OS X Snow Leopard 10.6
Web-based management	No
Ethernet LAN (RJ-45) ports	3
Security algorithms	WPA, WPA2
Product color	Black

Weight and Dimensions

Weight	- g