3
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
PERSONAL INJURY AND/OR PRODUCT OR PROPERTY
DAMAGE IF NOT SAFELY ADHERED TO AND WITHIN
THE PARAMETERS SET FORTH IN THIS MANUAL.
Resources Required
• Cordless or electric drill or screw gun
• Appropriate drive bits
• #10 x 1” wood screws (Wood screws may be required
depending on floor structure.)
Parts List
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
NOTE: Flex Guard and Flex Guard clips are available in
single, double and triple belt heights.
Single Flex Guard Kit
Single Flex Guard Kit - 1346271Single Flex Guard Kit - 1346271
LetterLetter PNPN DescriptionDescription QtyQty
A 114828 Single Flex Guard, 50 1/2” 1
B 115204 Aluminum Post Assembly, 8” 1
C 100801 Single Flex Guard Clip 5
D 100899 Star Washer 1
E 118102
Screw, 1/4” - 14 x 1”, Self-drilling
Hex Head Washer
6
A
B
C
D E
ALWAYS WEAR EYE PROTECTION WHEN
PERFORMING SERVICE OR MAINTENANCE TO THE
UNIT. OTHER SAFETY EQUIPMENT TO CONSIDER
WOULD BE HEARING PROTECTION, GLOVES AND
POSSIBLY A FULL FACE SHIELD, DEPENDING ON
THE NATURE OF THE TASK.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
To Next Page
Loading...
Need help?
General
