Rev: 07.09.19 Page 2
CCD-0002369
TABLE OF CONTENTS
Introduction 2
Safety 2
Resources Required 2
Installation 2
Introduction
The Retractable Pet Leash provides a secure option which allows your pet to roam around the camp site.
Additional information about this product can be obtained from lci1.com/support or by downloading
the free myLCI app. The app is available on iTunes® for iPhone® and iPad® and also on Google Play™ for
Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
Safety
Resources Required
Fig. 1
A
X X
Fig. 2
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
Moving parts can pinch, crush or cut. Keep clear and use caution.
• Cordless or electric drill or screw gun
•
¼
" or
⁄
" drill bit
• Ratchet wrench with
⁄
" and
⁄
" sockets
•
⁄
" and
⁄
" wrenches
• Marking device
Installation
1. Place pet leash housing in desired mounting location on the rear bumper (Fig. 1).
2. Inserting a marking device through the holes (Fig. 1A), mark location of the mounting holes on the
surface of the bumper (Fig. 2).
3. Using a ¼" or ⁄" drill bit, drill two holes through the bumper at marks made in step 2.
4. Position the pet leash housing on the bumper, aligning the holes of the housing with the holes drilled
in step 3.
Drill Marks
Rear Bumper
To Next Page
Loading...
Need help?
General
