Rev: 12.09.20 Page 2 CCD-0003956
TABLE OF CONTENTS
Introduction 2
Safety 2
Operation 3
Maintenance 3
Troubleshooting 3
Introduction
The Solera® Slide Topper with Access Plates is a high-quality, cost-effective way to help keep slide-outs free
of dirt, leaves and debris. The Slide Topper is permanently attached to the slide-out and retracts/extends
with the room.
Additional information about this product can be obtained from lci1.com/support or by using the myLCI
app. Replacement kits can be ordered from https://store.lci1.com/ or by using the myLCI app.
The myLCI app is available for free on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™
users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in this
manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Moving parts can pinch, cut, or crush. Keep clear and use caution.