regardless of color, also indicates
battery status.
Wait for the Repeater’s Status LED
to turn o, then press and release
the Alert Indicator’s button. The in-
dicator’s LED will ash as follows:
• Green to indicate the Repeat-
er is in range and monitoring;
tires within pressure and tem-
perature limits.
• Yellow if there is no connec-
tion or out of range of the Re-
peater; cannot detect tire status.
• Red to indicate a fault, either
high/low pressure or tempera-
ture is out of range; Indicator will
beep for 10 seconds when tire
issue is seen for the rst time.
LED will continue to blink red
until fault is corrected.
Deep Sleep Mode
To place the Alert Indicator into
deep sleep mode, hold the button
until hearing one beep and then
release it. The Alert Indicator will
emit a happy tone and shut o.
NOTE: The Alert Indicator can
only enter deep sleep if not
plugged in.
• Red followed by blue notes
Indicator is not linked to the
Repeater.
Battery status indicators are as
follows (regardless of LED color):
• 3 blinks - Good, full charge
• 2 blinks - Low, not full
charge
• 1 blink - Critical, needs
charging
7
To Next Page
Loading...
Need help?
General
