Rev: 06.09.20 Page 13 CCD-0002734
A. Tap the OneControl icon (Fig. 4A) to launch the app.
B. The app will automatically detect the Tire Linc system.
NOTE: If necessary, follow the online prompts to set up Tire Linc within the OneControl app.
NOTE: If unable to download the OneControl app, or when not running the app, the Alert Indicator
is provided to send simple audio and visual alerts of a tire pressure or temperature event. No
additional programming of the indicator is required.
2. The smart phone will connect to the repeater and the app will display a trailer image with tire
pressures and temperatures (Fig. 17).
NOTE: Figure 17 shows tire pressures and temperatures within the tires’ specification ranges, while figure
18 shows a tire outside of itsspecifications.
3. With the OneControl app running, real-time tire event notifications will be sent to the smart phone.
4. Tap the notification to be taken to the TPMS screen in OneControl to see which tire(s) is/are
experiencing an event.
5. Tap the readout button (Fig. 17A) of a tire to launch its properties window (Fig. 19). Within the selected
tire’s properties window, various tire and sensor specifications can be observed and altered.
A. Last data received — posts the date and time the app last received tire monitoring system
information.
B. Pressure — posts the currently sensed pressure of the selected tire.
C. Temperature — posts the currently sensed temperature of the selected tire.
D. Battery Level — posts the current battery voltage of the sensor’s battery.
E. Low/High Pressure Threshold — posts the currently programmed low and high pressure limit for
the selectedtire.
F. High Temperature Threshold — posts the currently programmed high temperature limit for the
selected tire.
G. Maximum Temperature Change Limit — posts the currently programmed maximum +/-
temperature change limit for the selected tire.
Tires that have high or low air pressure can cause unforeseen detrimental eects on tires and
the unit, including undesirable tread wear. Tires should always be pressurized to within the
manufacturer's recommendations.
To Next Page
Loading...
Need help?
General
