12
1, 3
2
1
Clock Setting
When the microwave is connected to the mains power, the LED display will show ”1:01” and the microwave
will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock button and then press Stop/
Clear button and the LED display will show
”: 0” .
2. Press the Numeric buttons and enter the time.
For example, to input the current time ”12:30”,
you need to press the ”1”, ”2”, ”3”, ”0”. The
input time has to be between 12:00 and 11:59.
3. Press the Clock button again to complete the
clock setting. “:” will start flashing and the time
will illuminate to confirm that the clock setting
is complete.
• This is a 12-hour clock. When the
microwave is connected to the mains
power for the first time or when
the power is resumed after a power
interruption, the LED display will show
”1:01”. To re-set the clock, simply follow
the above 3 steps.
• In the process of clock setting, if the
Stop/Clear button is pressed or if there
is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 3.
• To find out the current time while the
microwave is operating, press the Clock
button. It will last for 2-3 seconds and
then return to its original display.
L20MS10_IB_final110113.indd 12 13/01/2011 9:54 AM
To Next Page
Loading...
Need help?
General
