30
3. Press the
buttons to select the options. Press the OK button and then press the buttons to adjust each option’s
setting.
Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music / Movie / Sports / User.
Alternative
You may press the S.MODE button to select the sound mode directly.
Treble Controls the relative intensity of higher pitched sounds (for User mode).
Bass Controls the relative intensity of lower-pitched sounds (for User mode).
Balance Adjusts the relative volume of the speakers in a multiple speaker system.
Auto Volume Volume levels are automatically controlled (e.g., advertisements tend to be louder than the
programmes).
SRS TruSurround
HD
SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS
Labs that provides an enhanced listening experience unlike any other technology that has been
offered for a two speaker playback environment. TruSurround HD builds upon its predecessor, the
industry leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD
process up to 6.1 channels for playback over two speakers or headphones, it also utilises additional
proprietary algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue
clarity for better intelligibility of vocals, and definition control for maximum high-frequency clarity.
Press the OK button to select On / Off.
AD Switch
(for DTV mode)
Audio Description is an auxiliary audio function that provides an additional audio track for visually
challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is
sent along with the main audio from the broadcaster.
• Set to “Off” for normal broadcasting sound coming out from speakers.
• Set to “On” to activate the description sound track if available. The availability of Audio Description
sound track is indicated by the visually impaired icon "V.I." in the information banner.
SPDIF Mode Selects the digital audio output mode. Press the OK button to select PCM / Auto.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected, press the AD button to display the sound information for the selected station.
Broadcast On Screen Display
Mono
Stereo
Dual
MONO / NICAM MONO
MONO / NICAM STEREO
MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II
Mono sound selection
If the stereo signal is weak, you can switch to mono by pressing the AD button. In mono reception, the clarity of sound is
improved. To switch back to stereo, press the AD button again.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to NICAM DUAL I, NICAM DUAL II, NICAM
DUAL I+II or MONO by pressing the AD button repeatedly.
NICAM DUAL I
Sends the primary broadcast language to the loudspeakers
NICAM DUAL II
Sends the secondary broadcast language to the loudspeakers
NICAM DUAL I+II
Sends the primary and secondary broadcast languages to the
loudspeakers
To Next Page
Loading...
Need help?
General
