Logik L714WM13E User Manual

35
GB
Press 3 sec. for Signal / Favourite
Favourite
Rinse & Spin
Spin Speed
Button
Select the desired spin
speed of the selected
wash programme -
you can also select
Rinse Hold
Temperature
Button
Press to select the
desired temperature.
when a temperature is
set the indicator LED.
(If no temperature
indicator is lit, the
water temperature is
cold)
Start/Pause
Button
Press to start your
wash. Press while
in operation to
pause your wash.
Delay Button
This button is used
to delay the wash.
Press continuously
to select the time
you want to start
the wash.
The Control Panel
Programme Dial
Dierent wash
programmes can be
selected according to your
wash requirements.
LED Display
• The delay light will be on to indicate the delay time. It will start the programme
after the selected hours.
• After the wash procedure begins, TIME will be illuminated, to display the
remaining time, that is , the wash finishing time.
• When the child lock function is selected CHILD LOCKED will be illuminated.
• When the door is at the lock state, DOOR LOCKED will be illuminated. The door
can be opened only after the light turns off.
During initial start-up and use of the unit, there may be a slight smell
while the motor is settling in. This is not a fault; this is normal operation.
Power Button
Press to turn on the
machine.
Press to turn o the
machine.
• If you need to change a setting after the wash has started, turn the power OFF then
ON again. Re-select the programme, spin speed and optional functions, and then
press the Start / Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the
washing machine. This is not an indication of a malfunction.
L714WM13E_IB_7L_RC_140107_Zell.indb 35 7/1/14 11:40 am

Logik L714WM13E Specifications

General

Brand	Logik
Model	L714WM13E
Category	Washer
Language	English