10
Cleaning Tips
Ensure that the appliance is switched off and isolated before cleaning the oven to avoid the
possibility of electric shock.
1. Allow the oven to fully cool before cleaning. Remove the wire shelves, wash them separately in hot soapy
water and dry thoroughly.
2. Wash the interior of the oven with hot soapy water and wipe down with a damp cloth.
3. Leave the door open until the interior has dried, before replacing the wire shelves.
4. Clean the oven after each use, especially after roasting or grilling, this will prevent spilt or splattered food
debris burning and becoming difficult to remove.
5. Do not use abrasive pads to clean the interior of the oven as this may remove the enamel, which will affect
the efficiency of your oven.
6. Steam cleaners must never be used to clean this oven.
Cleaning the Outside of the Oven
1. You should regularly wipe over the control panel and oven door using a soft cloth and liquid detergent as
spilt liquids may damage the finish.
2. Wash enamelled or chrome plated parts of the oven with hot soapy water or with non-abrasive detergents.
3. Never use abrasive pads to clean enamelled, chromed or stainless steel surfaces.
4. When using commercially available stainless steel cleaning products, avoid cleaning any lettering or
symbols, as they can become damaged.
Cleaning the Oven Door Glass
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they scratch the
surface, which may result in shattering of the glass.
LBPCKX10_Oven_Vestel_IB_final110420.indd 10 20/04/2011 9:52 PM
To Next Page
Loading...
Need help?
General
