12
4. Now pull the door forward off the oven. Releasing both
hinge sections from the slots.
3. Slightly close the door and lift. The notch on the bottom of
the hinge will disengage.
To replace the door, repeat the above steps on reverse order.
Ensure to locate the hinge correctly, place the groove of the
hinge directly on the edge of the door frame. Push forward the
swivel retainers to the original position and gently close the door.
If the door does not close properly, repeat the steps again.
Taking out the Glass from the Oven Door for Cleaning
1. Remove the oven door.
2. Undo the screws from the metal panel that holds the glass in
place.
3. Lift the glass out of the frame. Clean it using appropriate glass
cleaning products.
It may require a little force due to the adhesive
pads under glass.
4. To replace the glass, place it back in, placing the securing caps
over the top of the glass and screw it back into place.
5. Ensure the glass is not damaged in any way or it may shatter
during use.
* All images are for indication only; please refer to your individual unit for actual item.
LBPCKX12_Oven_IB_120601_Annie(Check).indd 12 12年6月1日 下午5:51
To Next Page
Loading...
Need help?
General
