14
• The kitchen area should be dry and aired and equipped with sufficient ventillation.
• When installing the oven, easy access to all control elements should be ensured.
• Coating or veneer used on fitted furniture must be applied with a heat-resistant adhesive (100°C). This prevents
surface deformation or detachment of the coating.
• Make an opening with the dimensions given in the diagram for the oven to be fitted.
• Make sure the power is disconnected and then connect the oven to the mains supply.
• Insert the oven completely into the opening then use the 4 screws supplied to fix the oven to the furniture.
• To reduce the risk of fire, do not place or install this unit in areas where the ventilation or circulation ducts
may become blocked. Keep a small distance on each side of your oven so that you can use that distance for
installing the oven.
The mains connection for this product must have an all pole disconnection provided in the fixed wiring in
accordance with the local wiring regulations.
To avoid any potential hazard, you must follow these instructions when you install your appliance.
Tall Housing Unit
min.
Built Under Counter
LCPCKX11_Oven_IB_final110413.indd 14 14/05/2011 5:30 PM
To Next Page
Loading...
Need help?
General
