EasyManuals Logo
Home>Logik>Dishwasher>LDW45S12

Logik LDW45S12 User Manual

Logik LDW45S12
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
The door should not be left in the open position since this could present a tripping hazard.
For energy saving, always remember to switch the dishwasher off when you have finished using it. The
dishwasher should not be left unattended when in use.
Remove the door to the washing compartment when removing an old dishwasher from service or
discarding it.
During installation, the power supply cord must not be excessively or dangerously bent or flattened.
Do not tamper with controls.
The appliance is to be connected to the water mains using new hose sets.
The maximum number of place settings to be washed is 9.
The maximum permissible inlet water pressure is 1Mpa, and the minimum permissible inlet water
pressure is 0.04Mpa.
Earthing Instructions
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance is equipped with a mains cable having an equipment-earthing conductor
and an earthing plug.
The plug must be plugged into an appropriate outlet that is installed and earthed in
accordance with local standards and requirements.
Improper connection of the equipment-earthing conductor could result in a risk of electric
shock.
The wires in the cord are coloured as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed or the plug does not fit correctly.
Never modify the plug provided with the appliance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LDW45S12 and is the answer not in the manual?

Logik LDW45S12 Specifications

General IconGeneral
BrandLogik
ModelLDW45S12
CategoryDishwasher
LanguageEnglish

Related product manuals