INSTALLATION
8
11. After placing the freezer door, screw the
middle hinge back onto the opposite
side of the unit.
Middle hinge
12. Carefully set the upper door back into
place. Ensure the fridge door is aligned
horizontally and vertically so that the
seals are closed on all sides before finally
tightening the top hinge.
13. Insert the hinge bracket and screw it to
the top of the unit.
14. Use a spanner to tighten it if necessary.
15. Put the top cover back on and fix it in
place with the screws.
16. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
Ensure the freezer door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
To Next Page
Loading...
Need help?
General
