Logik LSBSX16E - Pre-Use Preparations; Cleaning Before Use; Plug and Power Checks; Initial Power-On Procedure

23
INSTALLATION
GB
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a
damp sponge or cloth. Wipe completely dry before replacing the shelves and drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and
to allow it time to fall to the correct temperature. Your unit should not be overlled.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant uid needs time to settle. You
may damage the cooling circuit if the unit is turned on too soon.
LSBSX_W16E_IB_5L_RC_190411_grace.indb 23 11/4/2019 11:22 AM