G Pro X SUPERLIGHT FAQs 16
Connect two LIGHTSPEED devices to one receiver using the Device Pairing Tool
Starting from G HUB 2022.7, you’ll be able to connect two LIGHTSPEED devices to one
LIGHTSPEED keyboard receiver using the Device Pairing Tool. You will need a compatible
LIGHTSPEED mouse to pair with a compatible LIGHTSPEED keyboard receiver.
Below is the list of products supporting LIGHTSPEED Two Device Pairing from G HUB 2022.7 and
above:
Mice:
● G303 Shroud Edition
● G705
● PRO X SUPERLIGHT
● PRO X SUPERLIGHT 2
● The G502 X line (G HUB 2022.8 onwards)
Keyboards:
● PRO X TKL
● G715
● G915
● G915 TKL
Pairing 2 LIGHTSPEED devices to 1 receiver
To pair a second device to a LIGHTSPEED receiver:
1. Click on the three bars at the top left to reveal the Settings tab and click on it.
2. Under Support, click on Device Pairing Tool.
3. Select the device you want to pair, and click on Continue.
4. Select the receiver you want to pair this device to, and click on Continue.
5. In the dropdown, select the device you want to pair, and click on Begin Pairing.
6. Follow the onscreen instructions.
Unpairing 2 LIGHTSPEED devices to 1 receiver
To unpair a device from the receiver:
1. Click on the three bars at the top left to reveal the Settings tab and click on it.
2. Under Support, click on Device Pairing Tool.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
