English 9
Logitech® Wireless Headset H600
Status light indicators
Color/behavior Meaning
Green More than 30 minutes of battery life left
Red (+ beeping) Less than 30 minutes of battery life left
Orange Charging
Steady Wireless connected and ready to use
Blinking Wireless not connected
Pulsing Headset is off and charging
Off Headset is off
Note: To charge the headset, plug the included USB charging cable into your headset and computer. When the headset battery
is very low, a full charge can take up to three hours. But you don’t have to stop using the headset because it charges while
you talk or listen to music.
Important: At product end of life, the battery is removable for disposal/recycling ONLY. Please see www.logitech.com/support
for more information.
Help with setup
Something not sound right? No sound at all? Not connecting?
•Try moving the headset closer to the USB wireless Nano receiver. The wireless connection
status light on the headset turns solid green when the headset is in range (up to 30ft/10m)
with the Nano receiver. See the wireless performance table below for Nano receiver
placement tips.
•Make sure the headset is the active output audio device in both your application
and operating system. For more information, see Test the Headset.
•Adjust the volume and microphone settings to an audible level in both your application
and operating system.
•Quit and restart your media application.
•If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly
into your computer.
•Try using the headset with another computer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
