8
9
Logitech® Keyboard Controller Logitech® Keyboard Controller
2
Power everything on
Your new Keyboard Controller cannot control your devices until you complete
the on-screen setup.
1. To begin, turn on all devices using your current method of control.
2. Slide the power switch on the Keyboard Controller to ON.
3. Follow the instructions on the TV screen to complete setup.
OFF ON
CHANNELINFO MSGS A/B REMOTE
MENU
POWER
AUDIO IN
RL
VID IN
*
Off
TV
AVR
Companion Box
STB
Replace the batteries
1. Turn off the Keyboard Controller.
2. Open the battery compartment door by pressing down
on the arrow and sliding the door right.
3. Insert two new AA batteries, as shown in the drawing.
Note the orientation of the replacement batteries.
4. Turn on the Keyboard Controller. The power LED above
the Touchpad should light green.