Logitech X56 HOTAS User Manual

English 18
1. Name of the Part being Modied
This will either be the Stick or the Throttle unit for the X-56. If you wish to change the part
thatyou’re not currently on, use the back button (5) to go back to the selection screen.
2. Modiable Axes
This shows a list of all modiable axes. The Stick has three modiable axes:
- X Axis
- Y Axis
- Rudder Axis
The Throttle unit has six modiable axes:
- Left Throttle
- Right Throttle
- Rotary 1
- Rotary 2
- Rotary 3
- Rotary 4
3. Manual Axis Adjustment and Test Area
This area will show you how the current response curves / dead zones / saturation points are
setup on the selected axis. You can also adjust the center deadzone, the range saturation,
physical saturation, and the response curve on the selected axis. There is also a cross-hair
whichwill show the physical position of the axis you are manipulating.
4. Spring Values
This is a reference section when you are adjusting the axes on the Stick. It will act as a guide
for axis modication, and you may choose diering axis curves or deadzones depending on
theSpring you have tted to the Stick. If you are modifying the Throttle unit’s axes you will
notsee this reference section.
5. Back Button
Takes you to the device selection screen.
6. Physical Axis Adjustment Slider
Allows the ends of the axes, the far left and far right on the X Axis or full up and full down on
theY Axis, to be moved inwards towards the center point. It is similar to setting up a deadzone
at the far ends of your axis.

Logitech X56 HOTAS Specifications

General

Brand	Logitech
Model	X56 HOTAS
Category	Video Game Controller
Language	English