Lumens VC-A50P User Manual

English - 23
Gateway
192.168.100.254
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Audio
Audio In
Line In/Mic In
Set Audio In
Audio Enable
On / Off
Turn on/off audio output
Audio Volume
0~C~10
Volume Setting
Audio Delay
0 ~ 500 ms/ Off
Set audio delay
Encode
Sample Rate
1. 48 KHz (AAC)
2. 44.1 KHz (AAC)
3. 16 KHz (G.711
4. 8 KHz (G.711)
Set the encode type and sample rate
SDI supports the audio output of 48
KHz only.
System
Prompt
On / Off
Turn on/off the prompt information on
the display
IR Receive
On / Off
Turn on/off the infrared reception
Motionless
Preset
On / Off
When the function is enabled, the
screen will Freeze when Preset is
executed. Freeze will be released after
Preset is completed.
Tally Lamp
Enable / Disable
Turn on/off the Tally Mode
Language
English / Chinese
Language
Initial position
Last MEM / 1st
Preset
Output Mode
1. 1080p/60
2. 1080p/59.94
3. 1080p/50
4. 1080p/30
5. 1080p/29.97
6. 1080p/25
7. 1080i/60
8. 1080i/59.94
9. 1080i/50
10. 720p/60
11. 720p/59.94
12. 720p/50
Set output resolution
Control Device
Encoder / Controller
Control Device setting
Controller: Used as a joystick
Encoder: Used for tracking system
Protocol
Protocol V /
Protocol PD
Protocol V: VISCA
Protocol PD: PELCO D
PD Address
1~ C~255
The Protocol set to PD allows the
camera ID address to be assigned
Factory Reset
On / Off
Resume the factory default setting
FW Upgrade
On / Off
Upgrade Firmware
Status
Display the current setting status

Lumens VC-A50P Specifications

General

Brand	Lumens
Model	VC-A50P
Category	Security Camera
Language	English