33
Chapter 6 Network Function Settings Description
6.1 Connecting Camera to Network
6.1.1 Connecting to Internet
Two common connection methods are shown below
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the computer should be
changed so that it is on the same network segment as the camera
e.g.: The factory-preset default IP address of VC-A71P is 192.168.100.100. The
computer IP address must be set with the same network segment, such as
192.168.100.101, so that the computer can be connected correctly with the camera
Change network settings
Switch or router
Network cable
Network cable
VC-
71P
Computer
VC-A71P Computer
Network cable
To Next Page
Loading...
Need help?
General
