Lumens VCBC106d User Manual

18
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
2D NR
Off/ 1/ 2/ 3
3D NR
Off / LOW / Typ / Max
Image Mode
Standard / LED / Custom
The user may customize his/ her
desired image mode
Image Mode Load
ENTER
Adjustable when the Image mode is
set to Custom. After selected, the
corresponding Image mode
parameters will be read and applied to
Custom
Brightness
0~C~15
Adjustable when the Image mode is
set to Custom
Hue
0~C~15
Adjustable when the Image mode is
set to Custom
Saturation
0~C ~15
Adjustable when the Image mode is
set to Custom
Gamma
0~3
Adjustable when the Image mode is
set to Custom
Pan Tilt Zoom
Pan/Tilt Limit
On/Off
Turn on/ off the angle limit setting
Pan Right Limit
0~170
Limit the right angle
Pan Left Limit
-170~0
Limit the left angle
Tilt UP Limit
0~90
Limit the upward angle
Tilt Down Limit
-30~0
Limit the downward angle
Pan Flip
On/Off
Activate the reverse Pan direction
Tilt Flip
On/Off
Activate the reverse Tilt direction
Preset Speed
5/ 25/ 50/ 80/ 120/ 160/
200/ 300 deg/sec
Set the PTZ rotation speed when
Preset is performed
Preset Mode
Default / PTZ Setting
 Default: Call the preset, execute
Pan/Tilt/Zoom/Focus + picture
parameters setting
 PTZ Setting: Call the preset,
only execute Pan/Tilt/Zoom/Focus
PTZ Speed Comp
On/Off
Set the Pan/Tilt moving speed to vary
from the zoom position
D-Zoom Limit
x1~x12
Set the D-zoom limit
<Remark> 3840 x 2160 59.94/ 50
does NOT support this setting
PTZ Motion Sync
On/Off
When activated, PTZ synchronization
can be achieved by controlling with
the Presets
<Remark> Refer to the Preset speed
setting for this feature. The speed
may be adjusted automatically due to
the difference of PTZ moving range.
D-Effect
Mirror
On/ MIRROR/ Flip /
MIRROR + Flip
Set the mode at which the image is
mirror or flipped
Auto Focus
AF Sensitivity
LOW/ MIDDLE/ HIGH
For AF triggering speed, the higher
the speed is, the faster AF is triggered
AF Frame
Center / Full Frame / Auto
AF frame setting, when central area
was set as AF frame, focusing will be
on the center of the screen. When Full
Frame was set as AF frame, focusing
will be calculated based on the full
screen

Lumens VCBC106d Specifications

General

Brand	Lumens
Model	VCBC106d
Category	Security Camera
Language	English