LF2020/LF2090 Sit-To-Stand Patient Lift Owner’s Manual 7
If the patient lift is to be reshipped by common
carrier, it should be packed in the same carton/s
in which it was received.
Unpacking
1. Check for any obvious damage to the carton
or its contents. If damage is evident, notify
the carrier or your authorized Graham-Field
Health Products Dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from
the carton.
Note: Unless the patient lift is to be used
immediately, retain boxes, containers and
packing material for use in storing until use of
patient lift is required.
Inspection
1. Examine the exterior of the patient lift for
nicks, dents, scratches or other damage.
2. Inspect all components.
Storage
1. Store the repackaged patient lift in a dry area.
2. DO NOT place other objects on top of the
repackaged patient lift.
HANDLING PROCEDURES
SHIPPING AND TRANSPORTATION INSTRUCTIONS
1. Base-
2. Mast-
3. Control Box-
4. Pendant-
5. Actuator-
6. Lifting Boom-
7. Kneepad Assembly-
8. Footrest-
9. Brake-
FEATURES
To Next Page
Loading...
Need help?
General
