Taking a Measurement
1. Press the ON/OFF/START button. All displays will appear for approximately one second before
returning to “0”.
2. The unit will automatically inflate to the appropriate inflation
level based on the user's pulse oscillations. Measurement
will then begin. It is important to remain still and quiet
during measurement. Any significant movement may affect
measurement results.
3. When the measurement is completed, systolic, diastolic and
pulse will be shown simultaneously and be saved
automatically in memory system. Up to 60 measurement
readings can be saved in memory.
4. Press the ON/OFF/START button to turn off the power. If no
button is pressed, the unit will shut off automatically in one
minute.
Recalling Memory
1. To recall stored blood pressure readings
from memory, simply press the Memory
button. The last set of memorized
readings will be displayed.
2. Another press of the Memory button will
recall the previous set of readings.
3. All readings stored in memory will be
displayed with their sequence number.
6
To Next Page
Loading...
Need help?
General
