Lvneng LX05 User Manual

Make sure to check the following items before riding, which will guarantee your safety on the road.
Insert the key and turn leftwards, Open the saddle, Turn On the Air switch.
TIPS:
1
2
3
Insert the key and turn rightwards, “Powered” state is started,the instrument
is opened,and the “READY” light is ON,scooter is ready for driving now.
4
Press the "P" button with three(3) seconds, to exit the Parking
state,and the “P” indicator goes off,then you can start driving.Gently
turn the handlebar to ride on the road.
Before riding,make sure the electronic side stand retracted and
rotate the handlebar to ensure that the handlebar lock is closed.If
the Parking button is pressed when riding, the bike will be dis-
energized. So DO NOT press it when riding for avoiding danger
caused by the sudden loss of power.
If the electronic side stand is extended when riding, the bike will be
dis- energized. So DO NOT extend the electronic side stand when
riding for avoiding danger caused by the sudden loss of power.
The scooter must be fully stopped before starting. In case of
abnormality during riding, please ride carefully or push it to a safe
place. DO NOT try restarting the bike during riding or on the lane so
as to avoid danger.
Insert the main charger plug into the charging port of the scooter.
Insert the chargers AC power plug into the home power socket, and the battery starts charging when the charger indicator turns red. The battery is fully charged
if the charger indicator turns from red to green.
How to Charge the Battery
11 12
CHECKS BEFORE RIDING BATTERY USE INSTRUCTIONS
1
Put on the helmet, and retract the electronic side stand.
VIEW I
Charge Socket
1
3
2
P
P
READY
M
R
READY

Lvneng LX05 Specifications

General

Brand	Lvneng
Model	LX05
Category	Scooter
Language	English