Details Of Instrument Panel
7 8
SWITCH FUNCTIONOPERATION GUIDE
M
!
P
READY
ECU
Power is switch on, pay attention
Indicates the turn signal is on
Meter working temperature
Single support power off switch
Controller error
Motor or motor wire error
Brake or brake wire error
Handle or handle wire error
Scooter in P position
Low voltage need recharge the battery
Battery is under voltage
Lamp Function
High beam on
Gear postion display; single driving time
Speed display, km/h & mp/h switch is available;
external plug switch (off is km/h, on is mp/h)
Battery capacity level
Total milage of the scooter. Speed unit (mile/km)
synchronous switches.
(ODO is accumulated milage.
First showing the accumulated milage and then
single milage with 0000.0. Speed unit (mile/km)
synchronous switches.
Motor error, erase the error and run the
motor for 4 minutes, the error indicator
will disappear automatically.
Lamp Function
%
Left Start Button Right Start Button
1
2
3
2
3
1
1
2
3
High / Low
beam switch
High beam is on when turning
on the button
Low beam is on when turning
on the button
Left turning signal on
Right turning signal on
Horn on
Item Switch position Functions
Indicator control
Horn control
P
1
2
3
The gear postion will be shown on
the meter at the same time.
Turn left to open the lamp.
Turn right is off.
When the throttle or motor hall line,
controller is fault, hold on the
button will keep the scooter
running in low speed.
Turn the power off, clenched the
braking bar
Press the P button and hold on.
1
2
3
Gear Switch
Item Switch position Functions
Lamp Switch
Parking Gear
P
To Next Page
Loading...
Need help?
General
