12
CR-XBT Multimedia Monitors
CR-XBT Multimedia Monitors
CR-XBT Series Specifications
Appendix B: Technical Information
Construction Features
Basic Design Rectangular
Enclosure Construction Solid MDF
Finish Black Vinyl Wrap
Port Configuration Custom-tuned rear port tube
Damping Adiabatic batting
Display LED Power ring
(surrounding the Running Man logo)
Operating Temperature 0 – 40 ˚C
32 – 04 ˚F
Physical Properties
CR3-XBT:
Height: 8. in / 206 mm
Width: 5.5 in / 40 mm
Depth: 7. in / 80 mm
Weight: 7.8 lb / 3.5 kg
CR4-XBT:
Height: 8.9 in / 225 mm
Width: 6. in / 55 mm
Depth: 8.3 in / 20 mm
Weight: 0. lb / 4.6 kg
CR5-XBT:
Height: 0.2 in / 260 mm
Width: 6.9 in / 75 mm
Depth: 9.3 in / 235 mm
Weight: 4.9 lb / 6.8 kg
CR8-XBT:
Height: 4.8 in / 376 mm
Width: 9.9 in / 25 mm
Depth: 3.6 in / 346 mm
Weight: 35.2 lb / 6.0 kg
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©209 LOUD Audio, LLC.
All Rights Reserved.
Acoustic Performance
Frequency Response (-0 dB) 70 Hz – 20 kHz [CR3-XBT]
60 Hz – 20 kHz [CR4-XBT]
50 Hz – 20 kHz [CR5-XBT]
40 Hz – 20 kHz [CR8-XBT]
Frequency Response (–3 dB) 80 Hz – 20 kHz [CR3-XBT]
65 Hz – 20 kHz [CR4-XBT]
69 Hz – 20 kHz [CR5-XBT]
47 Hz – 20 kHz [CR8-XBT]
Maximum SPL Peak Per Pair 97 dB [CR3-XBT]
00 dB [CR4-XBT]
05 dB [CR5-XBT]
08 dB [CR8-XBT]
Crossover Frequency 3.0 kHz [CR3/4/5-XBT]
2.0 kHz [CR8-XBT]
Transducers
Low Frequency 3.0 in / 76 mm [CR3-XBT]
4.0 in / 02 mm [CR4-XBT]
5.0 in / 27 mm [CR5-XBT]
8.0 in / 203 mm [CR8-XBT]
Polypropylene-coated woofer
High Frequency 0.75 in / 9 mm
ferrofluid-cooled silk-dome tweeter
Amplifiers
Rated Power 50 watts peak [CR3-XBT, CR4-XBT]
80 watts peak [CR5-XBT]
60 watts peak [CR8-XBT]
Design Class D
Input / Output
Input Type /4" TRS Balanced / Unbalanced
RCA Unbalanced
/8" Stereo Unbalanced [CR5-XBT, CR8-XBT]
Input Impedance 20 k
balanced bridging;
0 k unbalanced
Output Type /8" Stereo Headphones
Power Requirements
CR3-XBT and CR4-XBT ~00V – 240 VAC, 50 – 60 Hz, 60W
CR5-XBT ~00V – 240 VAC, 50 – 60 Hz, 80W
CR8-XBT ~00V – 240 VAC, 50 – 60 Hz, 50W
Bluetooth Information
Bluetooth Protocol 4.2
Bluetooth Function Audio Streaming
To Next Page
Loading...
Need help?
General