EN
Electrical Connection
This beverage cooler should be properly grounded for your safety. The power cord of this beverage
cooler is equipped with a three-prong plug which mates with standard three prong wall outlets to
minimize the possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied.
This beverage cooler requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong
ground.
This beverage cooler is not designed to be used with an inverter.
The cord should be secured behind the beverage cooler and not left exposed or dangling to prevent
accidental injury.
Never unplug the beverage cooler by pulling the power cord. Always grip the plug firmly and pull
straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance. Use of an extension cord can
negatively affect the performance of the unit.
If any problems with the beverage cooler persist, please contact our Customer Service Dept. to
consult with a representative at 888 775-0202 or visit our website to request warranty service at
www.mcappliance.com.
WARNING
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized service center.
To Next Page
Loading...
Need help?
General
