APPLIANCE FEATURE
MCWC50DST: Wine Cooler
Engaged Wine Shelves
• There are five wine shelves of full depth in upper part of
cabinet to store wine bottles.
• The second supporting guide (Counted from top, see
illustration “A”) is not designed for wine shelves. It is only
for beverage shelf.
• All the top five wine shelve have tabs to engage the
cabinet on both sides.
• Any of the wine shelve can be removed to accommodate
larger bottles.
To Remove a Shelf:
• Remove all bottles from the shelves.
• Lift the shelve upwards and then gently pull out the shelves.
To Replace a Shelf:
• Place the sides of the shelves back onto the supporting guides of the cabinet and push back until
the shelf tabs slide into place.
NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles.
Bottle Arrangement
• The top five shelves each hold 8 bottles with the bottle necks
alternating front to back.
• The bottom rack, which consist of two stories, each holds 6
bottles with bottle necks facing the front.
MCBC58DST: Beverage Cooler
Engaged Beverage Shelves
• There are three glass shelves to store beverage cans or
bottles.
• All three glass shelves have tabs to engage the cabinet
on both sides.
• The shelves may be arranged on any supporting guide as
preferred.
• Any of the glass shelves can be removed to
accommodate larger cans or bottles.
To Remove a Shelf:
• Remove all cans or bottles from the shelves.
• Lift the shelve upwards and then gently pull out the
shelves.
To Replace a Shelf:
• Place the sides of the shelves back onto the supporting guides of the cabinet and push back until
the shelf tabs slide into place.
NOTE: Ensure that the tabs are firmly engaged in place before storing any beverages.
Warning:
• Do not press/jostle the circulation fan in the cabinet when you place in or remove the beverage
cans or bottles.
• Properly store your beverages so that the cans or bottles do not hinder air circulation inside the
cabinet.
EN
6
To Next Page
Loading...
Need help?
General
