4
HOW TO OPERATE
Starting your new Refrigerator
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the
interior with a clean moist cloth.
2. Insert the power supply cord into the socket.
3. Turn the thermostat dial to “7”. Close the door and let the refrigerator
operate for 15-20 minutes.
Temperature control
To control the internal temperature, adjust
the thermostat dial. The dial is numbered
from 1-7. Number 1 is the warmest setting,
number 7 the coldest.
The dial may be set any place on the scale.
It does not have to be set exactly on a
number. To make ice cubes in the freezer
compartment, adjust the thermostat to the
coldest setting.
How to defrost
MCBR170B/MCBR170S/MCBR170W/MCBR270B/MCBR270S/MCBR270W
Defrost the refrigerator when the frost accumulated on the evaporator is about
5mm (1/5inch) thick.
Set the thermostat dial to “OFF”. Remove frozen or perishable foods. keep drip
tray in place. Defrosting usually takes a few hours. To defrost quickly remove all
foods from the refrigerator and leave the door open.
Never use a knife or
other
metal instrument to scrape ice/frost from the evaporator. After defrosting,
empty water from drip tray and return the thermostat dial to the desired position.
MCBR445B/MCBR445S/MCBR445W
Just push the defrost button to defrost refrigerator without any change of the
thermostat dial. When the frost accumulated on the evaporator melts,
refrigerator works without any additional operations. During defrosting, keep
door closed and drip tray in place.
NOTE: Wait 3-5 minutes before restarting if you unplug the refrigerator.
The unit may fail to operate properly if restarted too quickly.
3
NAMES OF THE PARTS
! Chiller
@ Drain Pan
# Control Box
$ Shelf
% Magnetic Door Seal
^ Ice Cube Tray
& Rack
* Bottle Rack
( Crisper
) Can Dispenser
1 Defrost Button
To Next Page
Loading...
Need help?
General
